Under the wireless menu the scanner shows up as a wireless connection. The Epson Net Config does recognize the scanner. Paperless will not work with the scanner since is uses Image Capture. You can now scan from the Espon Document Capture application, but image capture will not work with the Wi-Fi scanner.The scanner is now setup with the Airport Base station.The Airport Utility will recognize the scanner and the status light should now be solid.The status light and error light will start blinking back and forth.Now press the connect button on the back of the scanner.Go the the Base Station pull down menu and select WPS printer.Open the Airport Utility and edit your Airport Configuration.Turn off the scanner and move the switch on the back to Wi-Fi.After a successful configuration Use the Device pull down menu and quit. Select WPA-PSK(AES) for security level.SSID: Enter the name of your Wi-Fi Network.Select infrastructure from the pull down menu.Select the DS-560 and click on the configuration icon.In the Wi-Fi pull down menu select the Direct 11111111 network device.Turn the scanner on and wait for the status light to become a solid light.A Set the scanner switch on the back to AP.Setting up a Epson DS-560 Wi-Fi Scanner with OS 10.10.2, and a Time Capsule. Here are the steps I used to connect the scanner wirelessly in 2015.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |